Toshiba e studio 3530c driver software#

Toshiba e studio 3530c driver software#

If you cannot find information on a particular printer model and cannot find any similar printer models listed, contact the Rochester Support Center for assistance by calling 1-800-IBM-SERV (1-80) and selecting the option for Software Support. This can be an indication of how well the new printer model will work with a System i using LPR, PJL, SNMP, IPP, or a PC5250 printer session. Note: In many cases, this document will list similar printer models that support the same printer data streams. If you are looking for information on a printer model that is not listed in this document, please refer to your printer manuals, search on the manufacturer Web site, contact the manufacturer directly to determine what printer data streams are supported on the printer, or look at the information listed for similar printer models.

This document might not list all available printer models. Note: Therefore, there are no guarantees that the information on any particular printer model is correct. In some cases, information on a particular printer model is based solely on what has been shown to work with other similar printer models. Information in this document has been gathered from many different sources, including printer manuals, manufacturer and third-party Web sites, and experience gathered from working with customers. Printers are listed in this document because they are known to exist therefore, being listed is not a statement that the printer model is supported. It also indicates whether each printer model is likely to work when printing from a System i using LPR, PJL, SNMP, IPP, or a PC5250 printer session. This document contains information on the capabilities that are supported on the printer hardware. If the writer fails, the error messages in the writer joblog will help to determine the cause. If the LPR/LPD printer has an IBM or Epson emulation mode:ĬNNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(Based on the emulation: *IBM42011 -OR- *EPFX850) INTNETADR('x.x.x.x') DESTOPT(XAIX) SEPPAGE(*NO) If the paper is not pulling from the expected drawer, try using MFRTYPMDL *HP5SI or *HP4000.įor a LAN attached continuous forms printer that supports LPR/LPD (usually a line printer or one that uses it's own printer language, such as Zebra (ZPL)):ĬRTOUTQ OUTQ(QUSRSYS/OutputQueueName) RMTSYS(*INTNETADR) RMTPRTQ(RAW) AUTOSTRWTR(1)ĬNNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(*WSCST) WSCST(QWPDEFAULT) TRANSFORM(*YES) MFRTYPMDL(*HP4) RMTLOCNAME('x.x.x.x') SYSDRVPGM(*IBMSNMPDRV) ONLINE(*YES) FONT(11) FORMFEED(*CONT) PRTERRMSG(*INFO) INACTTMR(*SEC15) TRANSFORM(*YES) MFRTYPMDL(*HP4) RMTLOCNAME('x.x.x.x') SYSDRVPGM(*IBMSNMPDRV -or- *HPPJLDRV)įor a LAN attached continuous forms printer that is SNMP capable: ONLINE(*YES) FONT(11) FORMFEED(*AUTOCUT) PRTERRMSG(*INFO) INACTTMR(*SEC15)

**Where x.x.x.x is the printer's IP addressįor a LAN attached printer that has drawers:ĬRTDEVPRT DEVD(PrinterName) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) Most printers that support LPD will accept communication over port 515 regardless of whether the correct remote printer queue value is used. Most PCL printers use port 9100 and regardless of the hardware, a PCL Manufacturer Type and Model, such as *HP4, *HP5SI, *HP4000, etc. Or, create a printer configuration and see if it works. Supported Network Protocols to see if TCP/IP LPR/LPD, Port 9100, IPP, or SNMP is listed.

Refer to the printer hardware documentation or visit the printer manufacturer's website to locate the printer's specifications to make the determination if it will work with the IBM i.Įmulation or Printer Languages, or search on PCL. This document is updated on an as needed basis. IBM support does not actively search for information about new or different printers. This document is not updated on a regular basis. N1019698: Printer Model Settings for Host Print Transform (HPT) N1019605: Information on Printers from Various Manufacturers It also indicates whether each printer model is likely to work when printing from the IBM Power Systems products using LPR, PJL, SNMP, IPP, or a PC5250 printer session.įor information on printers from other manufacturers, please refer to the following documents: This document contains information on the capabilities that are supported on printer hardware from Toshiba.